Zenitrix supplies, installs, repairs and services swing gate automation in Hyderabad. Arm or underground operators that open one or two gate leaves on hinges.
Swing Gate Automation gallery
What is swing gate automation?
Arm or underground operators that open one or two gate leaves on hinges.
Gate automation adds a motor, controller and safety devices to a sliding, swing, folding or telescopic gate so it opens and closes at the press of a button, a tap on a phone or a scan of a card. It is the most common upgrade for villas, gated communities and compounds in Hyderabad.
How it works
An operator (motor) moves the gate leaf. A control board decides when to open, stop or close, and reads inputs from remotes, keypads, RFID readers or a mobile app. Photocells and safety edges stop or reverse the gate if something is in the way.
Types of gate automation
Gate Automation come in several types. Use the table to see where each one fits, then open the page for the type you are considering.
| Type | What it is | Best suited to |
|---|---|---|
| Sliding Gate Automation | A motor with a rack and pinion drive that slides a gate sideways along a track or cantilever frame. | Villas and compounds where the gate cannot swing out, and busy community entrances. |
| Swing Gate Automation (this page) | Arm or underground operators that open one or two gate leaves on hinges. | Homes and compounds with enough space for the leaves to swing and a traditional look to keep. |
| Trackless Bi-Folding Gate Automation | A folding gate that moves without a floor track, using hinges and an overhead or wall-mounted drive. | Sites with a narrow side space or uneven ground where a floor track is a problem. |
| Telescopic Gate Automation | A sliding gate whose leaves stack and extend in sections, so it needs less side space than a single-leaf slider. | Wide openings with limited room beside the gate. |
| Bi-Folding Gate Automation | A gate made of hinged panels that fold as the gate opens, driven by a motor at the fold point. | Entrances where a swing gate would block a driveway or a slider has no space. |
| Cantilever Trackless Gate Automation | A sliding gate that hangs from rollers on a rigid cantilever frame and moves clear of the ground, so there is no floor track to clog with dust, stones or water. | Villas, farmhouses, factories and commercial yards with uneven, sloping or dusty ground where a floor track would collect debris, and sites that want a clean driveway. |
Best uses in Hyderabad
Homes and compounds with enough space for the leaves to swing and a traditional look to keep.
What to check before you choose
- Gate weight, width and condition
- Available space beside or behind the gate
- Power supply and backup needs
- Number of users and remotes
- Safety devices for pedestrians and vehicles
- Leaf swing space, hinge strength and wind load affect the choice of operator.
Technical specifications
Specifications are published only from the manufacturer datasheet. [CLIENT TO PROVIDE datasheet]
The datasheet for this product will list:
- Maximum gate weight
- Maximum gate width
- Opening speed
- Duty cycle
- Power supply
- IP rating
- Certifications
Control options
Remote, mobile app, smartwatch, RFID, keypad and ANPR are available only where the supplied controller supports them.
Installation process and timeline
Installation starts with a site survey of gate weight, width, alignment, ground level and power point. Civil work such as a foundation plate or rack track is prepared, the operator and controller are fitted, safety devices are set, and the owner is trained on remotes and manual release.
Safety features and certifications
Safety devices such as photocells and safety edges are part of a proper installation. CE, TUV and GeM details are shown only with verified certificates.
Certifications · Safety devices
Cost factors
Price depends on size, weight, brand, accessories and site conditions. We give a written quote after a free site visit.
What affects the cost · Which automation do I need?
Service and AMC
Related products
- Sliding Gate Automation
- Trackless Bi-Folding Gate Automation
- Telescopic Gate Automation
- Bi-Folding Gate Automation
Guides about gate automation
- Sliding vs Swing Gate Automation: Which Should You Choose?
- Swing Gate Operator Types Explained
- Villa Gate Automation Checklist for Hyderabad Homes
- How Automatic Sliding Gates Work
Available across Hyderabad
- Kokapet
- Neopolis
- Narsingi
- Financial District
- Tellapur
- Osman Nagar
- Kollur
- Velimela
- Manchirevula
- Gopanpally
- Gandipet
- Mokila
- Shankarpalli
- Rajendranagar
- Shamshabad
- Tukkuguda
- Adibatla
- Kompally
- Banjara Hills
- Jubilee Hills
- Madhapur
- Gachibowli
- Kondapur
- HITEC City
Frequently asked questions
How do I know if my gate can be automated?
The gate must be sound, reasonably light for its size and move freely by hand. A site survey checks weight, alignment, ground level and space, and any repair needed first.
What safety devices should an automatic gate have?
Photocells across the opening, a safety edge on the moving leaf, a warning lamp and a manual release are the basics. Pedestrian and vehicle paths should be considered separately.
How many remotes can one gate controller learn?
It depends on the controller model. Ask for the memory capacity of the controller you are quoted, especially for communities with many users.
How often should an automatic gate be serviced?
Gates used daily benefit from a scheduled check of the motor, rack or arms, limit settings and safety devices. Frequency depends on use and site conditions.
Do you repair gates and doors installed by other companies?
Yes. We service multiple brands. Send a photo or video of the issue on WhatsApp.
How do I request a free site visit?
Use the form, call or WhatsApp +91 85006 32002.