Check that the gate is straight, light enough for its size and moves freely by hand.
The operator needs a power point near the gate and conduit for cables to the photocells and keypad.
Decide who needs remotes, whether you want phone control and whether visitors will use an intercom or keypad.
Ask who will service the gate after installation and how to reach them.
Look at the gate first
Check that the gate is straight, light enough for its size and moves freely by hand. A gate that sticks or sags needs repair before any motor is fitted.
Note whether you have clear space beside the gate for a sliding design or room for the leaves to swing.
Plan power and cables
The operator needs a power point near the gate and conduit for cables to the photocells and keypad. Decide the position of the control box so it is protected from rain and easy to reach.
Choose control and safety
Decide who needs remotes, whether you want phone control and whether visitors will use an intercom or keypad. Insist on photocells and a safety edge, especially if children or pets use the driveway.
Think about service
Ask who will service the gate after installation and how to reach them. A simple annual check keeps small problems from becoming breakdowns.
Quick checklist before you decide
What to check on site
Gate weight, width and condition
Available space beside or behind the gate
Power supply and backup needs
Number of users and remotes
Safety devices for pedestrians and vehicles
How installation usually goes
Survey and preparation
Installation starts with a site survey of gate weight, width, alignment, ground level and power point. Civil work such as a foundation plate or rack track is prepared, the operator and controller are fitted, safety devices are set, and the owner is trained on remotes and manual release.
How the system works day to day
An operator (motor) moves the gate leaf. A control board decides when to open, stop or close, and reads inputs from remotes, keypads, RFID readers or a mobile app. Photocells and safety edges stop or reverse the gate if something is in the way.
Frequently asked questions
How do I know if my gate can be automated?
+
The gate must be sound, reasonably light for its size and move freely by hand. A site survey checks weight, alignment, ground level and space, and any repair needed first.
What safety devices should an automatic gate have?
+
Photocells across the opening, a safety edge on the moving leaf, a warning lamp and a manual release are the basics. Pedestrian and vehicle paths should be considered separately.
How many remotes can one gate controller learn?
+
It depends on the controller model. Ask for the memory capacity of the controller you are quoted, especially for communities with many users.
How often should an automatic gate be serviced?
+
Gates used daily benefit from a scheduled check of the motor, rack or arms, limit settings and safety devices. Frequency depends on use and site conditions.
Does Zenitrix offer a free site visit in Hyderabad?
+
Yes. We visit, measure and send a written quote. Call or WhatsApp +91 85006 32002 to book a visit.
Can Zenitrix repair or service systems installed by other companies?
+
Yes. We repair and service gates, doors, barriers and shutters from any brand, and offer AMC plans.
