Skip to content
Zenitrix Technologies

Boom and Flap Barriers

Automatic Bollards in Hyderabad

Supply, installation, repair and AMC of automatic bollards by Zenitrix.

Zenitrix supplies, installs, repairs and services automatic bollards in Hyderabad. Stainless-steel or mild-steel posts set into the ground that rise to block vehicles and sink flush with the road when access is allowed. They can be hydraulic, electromechanical or semi-automatic, and work with remotes, RFID or intercom.

Automatic Bollards gallery

What is automatic bollards?

Stainless-steel or mild-steel posts set into the ground that rise to block vehicles and sink flush with the road when access is allowed. They can be hydraulic, electromechanical or semi-automatic, and work with remotes, RFID or intercom.

Boom barriers, flap barriers and automatic bollards control vehicle and pedestrian entry and exit at apartments, IT parks, parking lots, factories and toll-style lanes. A raising arm gives a clear visual stop and works with tickets, RFID, ANPR or manual push buttons.

How it works

A motor housing lifts and lowers the arm. The controller takes a signal from a remote, card reader, ANPR camera or guard station. Loop detectors or photocells keep the arm up while a vehicle is underneath.

Automatic bollards for Hyderabad: how they work

Automatic bollards are posts set in the ground that rise to block vehicles and sink flush with the road to let them pass. They give strong vehicle control without a wide barrier arm or gate.

Key features of automatic bollards

How automatic bollards works, step by step

  1. Mechanism: the post and the pit. The bollard sits in a concrete pit with drainage. An inner mechanism lifts the post up and lowers it back down below the road surface.
  2. Mechanism: drive types. Hydraulic, electromechanical and semi-automatic types are used. The choice depends on speed, duty cycle and the impact protection required.
  3. Automation: control. A controller takes signals from remotes, RFID, ANPR, intercom or a guard push button and raises or lowers the bollards, singly or as a group.
  4. Automation: safety. Loop detectors and photocells stop the post from rising under a vehicle. Reflective bands and lights keep it visible, and an emergency lowering method works in a power cut.

Where automatic bollards is used

Works with

Installation and selection tips

Types of boom and flap barriers

Boom and Flap Barriers come in several types. Use the table to see where each one fits, then open the page for the type you are considering.

Types of Boom and Flap Barriers
TypeWhat it isBest suited to
Folding Boom BarrierA barrier arm that folds in the middle so it can work where overhead height is limited.Basement parking and low-ceiling entrances.
Fence Boom BarrierA barrier arm with a fence-style design that fills the gap to deter walking or crawling under the arm.Sites that want vehicle control with added pedestrian deterrence.
Telescopic Boom BarrierAn arm made of sections that extend to cover a wide lane while keeping the cabinet compact.Wide lanes where a single long arm would be heavy or sag.
Arm-Out Boom BarrierA straight-arm automatic barrier for standard vehicle lanes.Apartments, offices and parking lots with regular lane widths.
Advertising Boom BarrierA barrier whose arm or panel carries a branding or advertising message.Malls, campuses and paid parking where entry points can carry a message.
Flap BarrierA pedestrian entry barrier with retractable flaps that open for authorised people and close to block others.Office lobbies, IT parks, hospitals, malls, metro-style entrances and any site that needs controlled walk-in access.
Glass Speed GateA premium flap or swing-style speed gate with glass panels and a stainless-steel body for fast, elegant pedestrian control.Corporate lobbies, hotels, data centres, showrooms and premium buildings.
Automatic Bollards (this page)Stainless-steel or mild-steel posts set into the ground that rise to block vehicles and sink flush with the road when access is allowed.Gated communities, IT parks, malls, hotels, embassies, government buildings, pedestrian zones and any entrance where vehicles must be kept out or let in under control.

Best uses in Hyderabad

Gated communities, IT parks, malls, hotels, embassies, government buildings, pedestrian zones and any entrance where vehicles must be kept out or let in under control.

What to check before you choose

Technical specifications

Specifications are published only from the manufacturer datasheet. [CLIENT TO PROVIDE datasheet]

The datasheet for this product will list:

Control options

Remote, mobile app, smartwatch, RFID, keypad and ANPR are available only where the supplied controller supports them.

Installation process and timeline

The barrier cabinet is fixed on a concrete plinth with conduit for power and signal cables. The arm length is matched to the lane width, loops and sensors are placed, and the opening and closing speed is tuned for the traffic.

Safety features and certifications

Safety devices such as photocells and safety edges are part of a proper installation. CE, TUV and GeM details are shown only with verified certificates.

Certifications · Safety devices

Cost factors

Price depends on size, weight, brand, accessories and site conditions. We give a written quote after a free site visit.

What affects the cost · Which automation do I need?

Service and AMC

Related products

Guides about boom and flap barriers

Available across Hyderabad

Frequently asked questions

How is a bollard different from a boom barrier?

A boom barrier uses a raising arm and is visible and easy to pass under when open. A bollard is a solid post that can stop a vehicle and leaves the road clear when lowered.

What does an automatic bollard need on site?

A pit with drainage, conduit for power and signal, and a control point. We confirm details on the site visit.

How do I choose the length of a boom barrier?

Measure the clear lane width and add a safe allowance. Very wide lanes or low ceilings may call for telescopic or folding arms.

Can a boom barrier work with RFID or ANPR?

Yes, boom barriers commonly connect to RFID readers, ANPR cameras, tickets or keypads. Compatibility depends on the controller and reader supplied.

What stops a boom from hitting a vehicle?

Loop detectors under the lane and photocells keep the boom up while a vehicle is present. These devices are part of a proper installation.

Do boom barriers need a foundation?

The housing is normally fixed to a concrete base with anchor bolts, and conduit is laid for power and signal cables. Your site survey will confirm the details.

Do you repair gates and doors installed by other companies?

Yes. We service multiple brands. Send a photo or video of the issue on WhatsApp.

How do I request a free site visit?

Use the form, call or WhatsApp +91 85006 32002.

Get a free site visit

By sending, you agree to be contacted about your enquiry. See our Privacy Policy.