A gate that is bent, rubbing or hard to push by hand needs repair before automation.
Sliding gates need clear space along the fence for the leaf to travel.
Think about who uses the gate, whether you want a phone app or cards, and whether you need a pedestrian opening.
The gate itself
A gate that is bent, rubbing or hard to push by hand needs repair before automation. Automating a stiff gate wears out the operator early.
Space and power
Sliding gates need clear space along the fence for the leaf to travel. Operators need a power point nearby, and long cable runs may need extra work.
Decide how you want to use it
Think about who uses the gate, whether you want a phone app or cards, and whether you need a pedestrian opening. Sharing this early gives a better quote.
Quick checklist before you decide
What to check on site
Gate weight, width and condition
Available space beside or behind the gate
Power supply and backup needs
Number of users and remotes
Safety devices for pedestrians and vehicles
How installation usually goes
Survey and preparation
Installation starts with a site survey of gate weight, width, alignment, ground level and power point. Civil work such as a foundation plate or rack track is prepared, the operator and controller are fitted, safety devices are set, and the owner is trained on remotes and manual release.
How the system works day to day
An operator (motor) moves the gate leaf. A control board decides when to open, stop or close, and reads inputs from remotes, keypads, RFID readers or a mobile app. Photocells and safety edges stop or reverse the gate if something is in the way.
Frequently asked questions
How do I know if my gate can be automated?
+
The gate must be sound, reasonably light for its size and move freely by hand. A site survey checks weight, alignment, ground level and space, and any repair needed first.
What safety devices should an automatic gate have?
+
Photocells across the opening, a safety edge on the moving leaf, a warning lamp and a manual release are the basics. Pedestrian and vehicle paths should be considered separately.
How many remotes can one gate controller learn?
+
It depends on the controller model. Ask for the memory capacity of the controller you are quoted, especially for communities with many users.
How often should an automatic gate be serviced?
+
Gates used daily benefit from a scheduled check of the motor, rack or arms, limit settings and safety devices. Frequency depends on use and site conditions.
Does Zenitrix offer a free site visit in Hyderabad?
+
Yes. We visit, measure and send a written quote. Call or WhatsApp +91 85006 32002 to book a visit.
Can Zenitrix repair or service systems installed by other companies?
+
Yes. We repair and service gates, doors, barriers and shutters from any brand, and offer AMC plans.
