Boom Barriers for Hyderabad Gated Communities and Offices

Key takeaways

• Boom barriers control vehicle entry at apartment gates, IT parks, hospitals, malls and parking lots.
• Arm length depends on lane width.
• Decide where vehicles stop, how visitors are handled and where the guard sits.

Quick checklist before you decide

What to check on site

• Lane width and whether height is restricted
• Vehicles per hour at peak time
• Access method: RFID, ANPR, ticket or manual
• Pedestrian crossing near the lane
• Cable routes and plinth location

How installation usually goes

Survey and preparation

The barrier cabinet is fixed on a concrete plinth with conduit for power and signal cables. The arm length is matched to the lane width, loops and sensors are placed, and the opening and closing speed is tuned for the traffic.

How the system works day to day

A motor housing lifts and lowers the arm. The controller takes a signal from a remote, card reader, ANPR camera or guard station. Loop detectors or photocells keep the arm up while a vehicle is underneath.

Frequently asked questions